Trailing Arms Set ***Un-Welded***

From: $1,092.91

The tried and true method form Desert Racers of adding wheel travel to the rear suspension for greater speed and control in high-speed situations. These 3/16 plate boxed arms boast a center rib running the length of the arm and a full-length cross brace as well. At the shock mounting area, it is then double plated with an addition 1/8″ plate for increased strength. These 40.5″-41″ arms can net you a maximum of 24″ of vertical axle travel with only a 14″ shock.

SOLD IN PAIRS

Fabricated Trailing Arm ***Un-Welded***

In stock (can be backordered)

Weld-on Summit Machine Flex Joint × 2

A rebuildable spherical joint for the builder looking for quality. The Summit Machine Flex Joint was developed in 2004 and only keeps getting better. You will not find a higher quality, better functioning "Cartridge Style" joint than the Summit Machine Flex Joint. These joints meet or exceed expectations in performance, reliability and durability. Many success stories of this joint lasting 75,000 and even 100,000 miles or more! Joint specs: - (Billet) Housing is zinc plated after being beautifully machined to added rust and corrosion protection. Machined with precision and exacting standards with threads complying with ANSI standards. - Races are machined from an engineered plastic complete with grease grooves in the race concavity. These grooves keep grease surrounding the ball and ensure they are nice and quiet. No more squeaky heims! - Center pivot ball machined from mild steel with a smooth nickel plating for even wear with races and added rust prevention. - Flat washer and machined threaded retaining ring yellow zinc plated for corrosion resistance.

Summit Machine Flex Joint Right Hand × 2

The Summit Machine Large Flex Joint is our most popular size joint we make. A rebuildable spherical joint for the builder looking for quality. These joints meet or exceed expectations in performance, reliability, and durability. Many success stories of this joint lasting 75,000 and even 100,000 miles or more! See below for full description...

  • 3.125" x 2.625"
  • 5/8" Bore

1.25" Hex Tube Adapter - Right Hand × 2

In stock (can be backordered)

1.25" Jam Nut Right Hand × 2

Hardware, Trailing Arms

Welding Labor × 8

Available on backorder

SKU: FTA-4WU-41S Category:

Description

The tried and true method form Desert Racers of adding wheel travel to the rear suspension for greater speed and control in high-speed situations. These 3/16 plate boxed arms boast a center rib running the length of the arm and a full-length cross brace as well. At the shock mounting area, it is then double plated with an addition 1/8″ plate for increased strength. These 40.5″-41″ arms can net you a maximum of 24″ of vertical axle travel with only a 14″ shock.

Additional information

Weight 85 lbs
Dimensions 44 × 12 × 6 in