Cantilever Rear Suspension

Name: Cantilever Rear Suspension
SKU: 3G4-CAN-SYS
Availability: InStock

From: $4,036.84

No more cutting into the body. No loss of storage, no weather proofing concerns or costly custom sheetmetal work needed.

Specific to the 3rd Gen Toyota 4Runner, Here is our all new, and eagerly anticipated rear cantilever system.

Using a 10″x 2.5″ Coilover. This system will net 15-16 inches of vertical travel and 23-26 inches of articulation, when used with a coilover. It can be used with a standard smooth bod shock or external by-pass if you intend to continue using your standard spring, however travel numbers will vary.

Unique to our take on what a cantilever should be, there are no bushings to wear out every 5,000 street miles. This system rides on actual wheel bearings and wheel hub just like a solid axle does. So you can expect to get far more life before maintenance is required. Additionally this system sports an optional internal Anti-Sway bar and locking hub design, making it both street and off-road friendly with the turn of a dial.

Maximum Engineering =
Maximum Performance =
Maximum Convenience =
Maximum Fun

Currently this product has an 8 week build time.

SKU: 3G4-CAN-SYS Categories: 4Runner '96-'02, Shock Mounts

Rear Cantilever Rocker Arm

3RD Gen 4Runner Cantilever Rocker Arm set. Outboard location of arms allows the use of either 1 2.5" Coilover or 1 By-Pass Shock per arm. Does not locate inside the frame rails. Allows for under cab storage or fuel cell or gas tank behind axle.

In stock (can be backordered)

Torque Housing Bracket

Torque Housing Bracket. These beefy parts hold the Cantilever System to your frame.

In stock (can be backordered)

3RD Gen Cantilever Coilover Bracket

In stock (can be backordered)

Cantilever Axle Tab

Cantilever Axle Tab is the connection point from the Rocker Arm Shackles to the axle. A total of 2 tabs included.

In stock (can be backordered)

Cantilever Hub Units

Cantilever Spindles

Cantilever Bearing & Seal Kit

Cantilever Spindle Nut Kit

3RD Gen 4Runner Cantilever Torque-Tube Housing

In stock (can be backordered)

0.875" High Misalignment Spacer- for 1.75" Mounting Width "Single " × 4

Fits FK- RSMXT-12 Hiems. 3-piece high strength alloy, 3/4" bore, 7/8" - 14 tpi shank and Teflon liner.

In stock

0.875" High Misalignment Spacer- for 1.5" Mounting Width "Single " × 4

Fits FK- RSMXT-12 Hiems. 3-piece high strength alloy, 3/4" bore, 7/8" - 14 tpi shank and Teflon liner.

Sold individually, qty of 2 need for 1 hiem

In stock

0.875" Jam Nut - Right Hand Thread × 2

0.875" Jam Nut - Left Hand Thread × 2

0.875" Long Neck Hex Tube Adapter - Right Hand × 2

In stock (can be backordered)

0.875" Long Neck Hex Tube Adapter - Left Hand × 2

In stock (can be backordered)

Cantilever Locking Hub and Drive Slug Combo

Drive Slug on one side
Yukon Locking hub on the other.
All for you quick disconnect
anti sway bar

Cantilever Anti Sway Bar

Double Heat Treated 300M bar
Precision cut and phased splines
Polished and Powder Coated

Radflo 2.5" x 10" Remote Resi Coilover for 4WU Rear Cantilever

Sold in Pairs only
Includes all Dual Rate spring hardware
Two springs per corner
Wobble stoppers
90* hose fittings
and Raised Spring Cup

$1,749.00

Radflo 2.5" x 10" Piggy Back Coilover for 4WU Rear Cantilever

Sold in Pairs only
Includes all Dual Rate spring hardware
Two springs per corner
Wobble stoppers
and Raised Spring Cup

$1,989.00

Additional information

Additional information

Weight	49 lbs
Dimensions	18 × 16 × 10 in

Cantilever Axle Tab

Triangulated	3" Tubes, 3.5" Tubes
Parallel	3" Tubes, 3.5" Tubes

Radflo 2.5" x 10" Remote Resi Coilover for 4WU Rear Cantilever

Weight	65 lbs
Dimensions	40 × 13 × 13 in
Coilover Type	Radflo 2.5" x 10" Remote Resi Coilover for 4WU Rear Cantilever, Radflo 2.5" x 10" Piggy Back Coilover for 4WU Rear Cantilever

Radflo 2.5" x 10" Piggy Back Coilover for 4WU Rear Cantilever

Weight	65 lbs
Dimensions	40 × 13 × 13 in
Coilover Type	Radflo 2.5" x 10" Remote Resi Coilover for 4WU Rear Cantilever, Radflo 2.5" x 10" Piggy Back Coilover for 4WU Rear Cantilever