Close
Axle Side Coilover Mounting for 3.500" Diameter axle tubes
Axle Side Coilover Mounting for 3.500" Diameter axle tubes - Image 2
Axle Side Coilover Mounting for 3.500" Diameter axle tubes - Image 3
Axle Side Coilover Mounting for 3.500" Diameter axle tubes - Image 4
Axle Side Coilover Mounting for 3.500" Diameter axle tubes - Image 5
Axle Side Coilover Mounting for 3.500" Diameter axle tubes - Image 6

Axle Side Coilover Mounting for 3.500″ Diameter axle tubes

From: $0.00

There are so many ways to mount a shock. Here are 5 for you to choose from.

Pocketed Shock Mount - Axle Side- HB 3.50

Fully boxed design for maximum strength.

Pocketed Shock Mount - Axle Side- HB/High Boy This weld it your self shock mount offers offers our highest elevated position for those wanting to keep this high and tight. It also offers an extra large drain hole to help clear out any water, rock or dirt. Built for a 1.5" mounting width with a 1/2" through hole. Fits a 3.5" Diameter axle tube. Perfect for Fabricated housings, 14bolts, Dana 80's and Sterlings 10.5.

$139.99

In stock

Pocketed Shock Mount - Axle Side- MB 3.50

Fully boxed design for maximum strength.

Pocketed Shock Mount - Axle Side- HB/High Boy This weld it your self shock mount offers an elevated position for those wanting to keep their shocks a bit higher. It also offers an extra large drain hole to help clear out any water, rock or dirt. Built for a 1.5" mounting width with a 1/2" through hole. Fits a 3.5" Diameter axle tube. Perfect for Fabricated housings, 14bolts, Dana 80's and Sterlings 10.5.

$114.99

In stock

Pocketed Shock Mount - Axle Side- LB 3.50

Fully boxed design for maximum strength.

Pocketed Shock Mount - Axle Side- LB/Low Boy This weld it your self shock mount offers an Level tube position for those needing to keep their shocks underneath other critical areas. It also offers an extra large drain hole to help clear out any water, rock or dirt. Built for a 1.5" mounting width with a 1/2" through hole. Fits a 3.50" Diameter axle tube. Perfect for Fabricated housings, 14bolts, Dana 80's and Sterlings 10.5.

$94.99

In stock

Phase-4 Rear Coil-Over Tabs, for Triangulated Lower Links R.C.O.T.-3

Axle side coilover/shock mounting tabs.

To be used on either 3Link or 4Link Triangulated Lower link systems when through bed mounting is desired.

Sold as a pair. Will do both driver and passenger sides of axle.

$69.98

In stock (can be backordered)

Phase-4 Rear Coil-Over Tabs, for Parallel Lower Links R.C.O.T.-4

Axle side coilover/shock mounting tabs.

To be used on either 3Link or 4Link Parallel Lower link systems when through bed mounting is desired.

Sold as a pair. Will do both driver and passenger sides of axle.

$69.99

In stock (can be backordered)

SKU: SM-P4-335 Category:

Additional information

Pocketed Shock Mount - Axle Side- HB 3.50

Weight 2 lbs
Dimensions 6 × 6 × 6 in

Pocketed Shock Mount - Axle Side- MB 3.50

Weight 2 lbs
Dimensions 6 × 6 × 6 in

Pocketed Shock Mount - Axle Side- LB 3.50

Weight 2 lbs
Dimensions 6 × 6 × 6 in

Phase-4 Rear Coil-Over Tabs, for Triangulated Lower Links R.C.O.T.-3

Weight 2 lbs
Dimensions 6 × 6 × 6 in

Phase-4 Rear Coil-Over Tabs, for Parallel Lower Links R.C.O.T.-4

Weight 2 lbs
Dimensions 6 × 6 × 6 in

Related products